Spider Glass Systems in Dubai

Spider Glass Systems in Dubai: Frameless Structural Glazing

Spider glass (also called point-fixed or patch-fitted glazing) creates an almost invisible glass wall by fixing each panel at its corners rather than housing it inside a visible aluminium frame. Each panel is drilled and bolted to a stainless steel spider fitting, typically arranged in 2, 4, or 6-point configurations depending on panel size and load path. The fittings anchor back to a steel sub-frame, concrete structure, or the building's primary facade, and the gaps between panels are filled with structural silicone rather than a metal glazing bar. The result is a sheet of glass that reads as continuous and frameless, supported by fittings small enough to disappear against the scale of the glass itself. Diamond Step® installs spider glass systems across Dubai for commercial lobbies, hotel atriums, feature facades, canopy structures, and architectural statement glazing where a conventional framed system would work against the design intent.

Every spider glass installation begins with structural engineering rather than a standard order form. We calculate glass thickness against wind load and panel span, specify the spider arm configuration and fixing anchor design, and confirm deflection limits before a single panel is cut. Dubai's wind loading (particularly on taller or coastal-facing installations), and its intense solar gain both factor into the glass build-up, with toughened or laminated glass selected depending on panel height above ground and public access below. All exposed metalwork is specified in marine-grade 316 stainless steel to withstand the Gulf's humidity and salt-laden air over the long term, and silicone joints use UV-rated sealant so panel edges don't discolour or fail under years of direct sun. We work from architect-issued specifications and shop drawings where a design already exists, and design the system in-house (producing our own shop drawings and structural calculations) for design-build and fit-out projects with no architect engaged.

Why Choose Diamond Step in Dubai?

• Point-fixed system with no visible aluminium frame
• Minimum 12mm toughened or laminated structural glass
• Stainless steel spider arms in 2, 4, and 6-point configurations
• Structural engineering calculations for every installation
• Silicone weather seal between panels for watertight facade
• Suitable for lobbies, atriums, feature walls, and canopies

What We Install

Areas We Cover in Dubai

How a Spider Glass Installation Comes Together in Dubai

Most spider glass enquiries in Dubai start with a lobby, showroom, or feature entrance where the architect or developer wants a frameless look that framed glazing can't deliver, common in commercial towers around Business Bay and DIFC, and in hotel and retail fit-outs across Downtown Dubai and Dubai Marina. After a free site visit to record openings, structural fixing points, and access, we produce shop drawings and structural calculations for approval, then fabricate the spider fittings and cut glass to the confirmed sizes in our own workshop. Installation is sequenced panel by panel, with each fitting torqued to specification and every joint checked before the silicone seal goes in, so the facade is weathertight from day one rather than needing rework once it's exposed to Dubai's heat and dust.